2013年10月16日 星期三

P2V functionality will be retired from the System Center 2012 R2

  這算是好消息?還是壞消息呢?

  就在滿心期待 System Center 2012 R2 - Virtual Machine Manager 的即將來臨,原本還想說會有新功能的 P2V,沒想到又被澆了一盆冷水。

        就在 Release Notes for Virtual Machine Manager in System Center 2012 R2 中出現了以下這一段文字

========================================================================P2V functionality will be retired
Description: The Physical-to-Virtual (P2V) feature will be removed from the System Center 2012 R2 release.
Workaround: This is by design.
========================================================================

        微軟怎麼把這個功能給閹割掉呢?只保留了從 VMWARE 移轉過來時使用的 V2V。必竟在目前這個時間點來看,應該還有很多的實機主機仍未轉換到虛擬環境中

        除了無法移轉非 Windows 系統的主機外,SCVMM 中的 P2V 還真的不錯用,它可以有效且快速的轉移實體主機,對於要進入虛擬世界的IT人來說是個好工具,也縮小了移轉的門坎。

        後續能做的方法只能保留一台 System Center 2012 SP1 - Virtual Machine Manager 來當作執行 P2V 的環境,等移轉後再將其移到 System Center 2012 R2 - Virtual Machine Manager 來管理。

2016/04/28 :
終於又開始轉換實體機,System Center 2012 R2 要轉換時只能用 Microsoft 虛擬機器轉換器 3.0,雖然不是整合在 SCVMM 內,但它有GUI ,操作還算簡單易用

========================================================================
從 System Center 2012 R2 開始,您已無法在 VMM 中執行 P2V 轉換。 請改用 MVMC。 如需詳細資訊,請參閱 Microsoft Virtual Machine Converter 3.0 ( Microsoft 虛擬機器轉換器 3.0 )。
========================================================================

2013年10月15日 星期二

System Center 2012 R2 Preview - Virtual Machine Manager 無法完成安裝

  微軟的錯誤訊息真的很難懂啦!

  為了暸解在這個號稱已幅改善與非 Windows 系統相容性的版本上,是否可以達成 非 Windows 系統的 P2V 動作,所以動下開始一連串的System Center 2012 R2 Preview 測試。

  Preview 的版本是英文的

  安裝時使用了 Windows Server 2012 R2 Preview 的 VHD 檔,少了基本作業系統安裝算是不錯啦!但 SCVMM 2012 R2 只能自行安裝,應該是跟 SCVMM 要加入AD 管理,所以只能自己安裝。

  對於安裝過 SCVMM 2012 ,且已經測試過一段時間的我又撞牆了

  在設完所有安裝參數開始安裝後,出現了 “Setup cannot be completed” VMM management server 安裝失敗,而且有很詳細的說明教你如何排除喔!!(心想微軟有長進了)


  上面的說明如下文:

========================================================================
Virtual Machine Manager cannot process the request because an error occurred while authenticating SRDD-SCVMM-Test.srdd.besta. 
Possible causes are:
1) The specified user name or password are not valid.
2) The Service Principal Name (SPN) for the remote computer name and port does not exist.
3) The client and remote computers are in different domains and there is not a two-way full trust between the two domains.
Log in by using an account on the same domain as the VMM management server, or by using an account on a domain that has a two-way full trust with the domain of the VMM management server, and then try the operation again. If this does not work, purge the Kerberos tickets on the VMM management server by using kerbtray.exe, available at http://go.microsoft.com/fwlink/?LinkId=93709. Then, reset the SPN for SRDD-SCVMM-Test.srdd.besta by using setspn.exe available from http://go.microsoft.com/fwlink/?LinkId=93710. If this still does not fix the problem, make SRDD-SCVMM-Test.srdd.besta a member of a workgroup instead of a domain, restart the computer, rejoin the domain, and then try the operation again.
========================================================================

  努力的看完這篇,依其說明試了幾個方法仍無解??

        只好放棄上述的說明,轉而求助 谷歌大神

  Bingo !! 第一手就中了~

        它居然是一個已知的問題:

        問題出在 Computer Name ,VMM Server 不能安裝於有 “ -SCVMM- ”為名稱的機器上,修改後就可以正常安裝。

         這時浮現的是:既然名稱上有這個限制,怎麼不在一開始就出現警告?或是在無法安裝時提出這個訊息?上面的那一長篇可能性問題,跟實際的有關嗎?至少我看不出來。而且其中的兩個聯結根本找不到